Solarez Epoxy UV Rez 60ml

Solarrez’s tried & proven formula for over 20 years has saved many a kayak or surfboard from the perils of water ingress in countries all over the Globe. Simple to use: sand-prep (60 grit included) the surface around the ding, crack or small hole, squeeze out enough Solarez to fill the ding, cover the wet resin with a piece of plastic baggie, smooth it out (this is to aid the surface finish quality), and EXPOSE TO SUNLIGHT FOR A MINUTE OR TWO. Now, peel off the baggie and do some minor touch-up sanding with the 240 grit side (included) and GO SURF!

This is a LOW EXOTHERM formula that will not melt delicate EPS (Surfboard Foam) like other products. They don’t melt at first, but while curing, they exothermically create so much heat, they melt the foam and actually create a more cavernous ding than you had!
Solarez has glass and ceramic fibres in it which provides better adhesion, and impact resistance. That, coupled with a flexible resin gives Solarez Epoxy Ding Repair a tough, resilient finish. – IN LESS THAN THREE MINUTES

Contents
Tube of reinforced resin 2fl oz (59 ml)
Dual sided sanding Pad (60 & 240 grit)

Barcode 728392758001

DATA SHEET

Solar Rez is a ceramic & glass-fibre filled light viscosity putty that quickly (<1 minute) cures when exposed to sunlight / UV light source.
It will not melt EPS / Styrofoam and it is compatible with polyurethane (CLARK) foam, making it a universal surfboard repair kit.
It has outstanding surface cure, good scratch & chemical resistance, non-yellowing and excellent gloss with extremely low odor
or skin irritation. This product complies with following regulations: REACH, TSCA, IECSC, METI & CLP Hazard.

PHYSICAL PROPERTIES (easy to understand)
Appearance Gardner <2 (clear to pale blue)
Density 1.26 (25% denser than water. i.e. it will sink)
Viscosity 750 cPs (like yoghurt)
Cured Hardness 80 Shore D (Hard, like PVC pipe)
Flex <5% (robust, like ABS)
Shelf Life 2-3 years if stored <75°F
Flashpoint >90°F (flammable, like auto diesel)
Heat Distortion Temp. 158°F (when structural strength begins to break down)
USER PRECAUTION:
It is always prudent to wear gloves, respirator and eye protection.
PRODUCT PRECAUTION:
Do not open container near indirect sunlight. Sunlight will cause the resin to begin the curing process.

UV CURE:

Natural mid-day sunlight in temperate latitudes is ample for good curing. Cure times are influenced by many factors; UV index (time of day, daily and seasonal arc-path of the sun, latitude, cloud cover, smog, altitude (higher altitudes cure faster). For indoor curing, UV LED flashlights lights are extremely effective but need to be 385nm type. Solarez makes 3 different size flashlights that function very well for curing this resin.

Solarez®
Fiberfil Epoxy
DING REPAIR
Ding Repair
Fiberfil Epoxy
2oz. UPC #75800